Progress PDG9140E Bedienungsanleitung PDF herunterladen (Seite 43)

progress

HOOD BODY MOUNTING

• Before attaching the hood body, tighten the two

screws Vr located on the hood body mounting

points.

• Hook the hood body onto the screws 12a.

• Fully tighten the support screws 12a.

• Adjust the screws Vr to level the hood body.

Connections

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the

hood to the chimney using either a ﬂ exible or rigid

pipe ø 150 or 120mm, the choice of which is left

to the installer.

• To install a ø 120 mm air exhaust connection,

insert the reducer ﬂ ange 9 on the hood body

outlet.

Fix the pipe in position using sufﬁ cient pipe

clamps (not supplied).

• Remove possible charcoal ﬁ lters.

RECIRCULATION VERSION AIR OUTLET

• Insert the connection extension pieces laterally

14.1 in connec-tion 15.

• Insert the Connector 15 into the Support bracket

7.3 and ﬁ x it with a screw.

• Make sure that the outlet of the extension pieces

14.1 is hori-zontally and vertically aligned with

the chimney outlets.

• Connect the air outlet connection 15 to the hood

body outlet using either a ﬂ exible or rigid pipe

ø 150 mm, the choice of which is left to the

installer.

• Ensure that the activated charcoal ﬁ lters have

been inserted.

ø 150

ø 120

ø 150

14.1

7.3

12a

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Keine Kommentare

Progress PDG9140E Bedienungsanleitung Seite 43