Progress PBK3360X Bedienungsanleitung PDF herunterladen (Seite 51)

progress 51

Removable telescopic shelf supports

and catalytic panels

Be careful when removing the

telescopic shelf supports. The

catalytic panels are not fixed to the

oven walls and may fall out when

the shelf supports are removed.

The shelf supports and the catalytic panels

can be removed for easy cleaning.

Make sure the appliance has

cooled down completely before

cleaning.

Proceed as follows :

1. Use one hand to pull on the front part of

the shelf support to remove it while

keeping the shelf support and catalytic

panel in place with the

other hand (1).

2. Hold the shelf support and catalytic

panel in place and at the same time

unhook the shelf support at the back (2).

3. Clean the shelf support with warm,

soapy water and wipe it with a soft

cloth.

Never use abrasive products which

could damage it.

4. Once you have finished cleaning

assemble the shelf support and

catalytic panel and replace it again

(reverse the steps above) - (3).

Check that the hooks are engaged properly

when you replace the shelf support and

catalytic panel.

Changing the interior light

Separate the appliance from the

power supply by switching off the fuse.

If the oven bulb needs replacing, the new

bulb must have the following specifications:

- Electric power: 15 W / 25 W

- Electric rate: 230 V (50 Hz)

- Heat resistance to 300°C

- Connection type: E14

These replacement bulbs can be

purchased from your dealer.

To change the oven bulb:

1. Before proceeding ensure the oven is cool and

is disconnected from the electricity supply.

2. Twist the bulb’s glass cover in an anti-

clockwise direction.

3. Remove the burnt out bulb and replace it

with a new one.

4. Replace the glass cover and reconnect the

oven to the electricity supply.

)

1

2

3

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare